How To Install Liquid Cooling Corsair

The Hydro Serial H100i GTX cooler is the latest version of our acknowledged H100i, improving upon its predecessor in nearly every way. While the 240mm radiator mounting it requires was less common when the original H100 launched, support for 240mm coolers is becoming ubiquitous in mainstream cases.

This guide is geared towards showing you how to install the H100i GTX on your Intel LGA115X processor. If you prefer video instructions, yous can picket our guide on YouTube here:

Permit's become started!

Step 1: Mount the Backplate

Beginning, adjust the notches on the backplate in for LGA115X compatibility.

Button the standoffs through the back of the motherboard.

Next, use the silvery standoff screws and insert them into the backplate. The backplate may be a piffling bit loose even with all four screws installed; this is normal.

Step 2: Attach Fans to Radiator

Nosotros'll demand to prep the radiator for installation inside your case.

Using the long screws included with the H100i GTX, attach both fans to the radiator, orienting the fan struts to the inside. Yous'll always exist able to tell which direction a fan blows by which side of the fan has the struts; we're orienting these fans to push button air through the radiator and exhaust that hot air outside of the case.

Footstep 3: Adhere Radiator to Case

Gently slide the H100i GTX into the top of your case (or wherever the available 240mm mountain is).

Apply the short screws and washers included with the cooler to affix it to the case. It may also be easier to install the center screws showtime.

With all eight screws installed, the H00i GTX should now be deeply mounted to the interior of your instance.

Stride iv: Mount the Cooling Block

The commencement affair we demand to practice before mounting the cooling cake is remove the protective plastic cover.

Notation that there'southward a silvery disc of thermal interface material already applied to the underside of the cake.

Slide the block onto the standoffs.

Use the included thumbscrews to secure the block, alternate corners in the same style you would remove or replace lugnuts on a tire. Be careful not to over-torque the screws; yous tin can apply a screwdriver, but "finger-tight" is typically enough.

Step 5: Connect Fan and Pump Power Cables

Now that nosotros have the H100i GTX physically mounted and the waterblock in identify, we need to connect the cables that allow information technology to run.

Connect the leads from the two fans to the waterblock's fan headers.

Connect the block pump to the CPU_FAN header on your motherboard.

Step vi: Connect Corsair Link Data Cable

While the H100i GTX tin operate without the Corsair Link software, information technology'southward needed to get the well-nigh out of your new libation. The Corsair Link software allows you to change the color of the pump cap backlight, adjust the pump speed, and programme your own fan curves.

Connect the mini-USB side of the included data cablevision to the waterblock.

Connect the USB header side to a gratuitous ix-pin USB ii.0 header on your motherboard.

When in Windows, visit the download site here to download the Corsair Link dashboard software to control the cooler.

Your new H100i GTX should now be fully operational!

Optional Actress Stride

While the H100i GTX is designed to be as piece of cake to use as possible, you may need to disable fan command on the CPU_FAN header in your motherboard's BIOS. Consult your motherboard's user manual for information on how.

Source: https://www.corsair.com/eu/es/blog/H100i_GTX_How_To

Posted by: stewartdrave1941.blogspot.com

Share this post